verhaalsite

Chapter:-Hatches and bulkheads-

Link back

Using organic shaped paper patterns I cut holes in the deck. The cutouts will later be used as hatchcovers. This was careful handiwork.

Three layers of very thin plywood were used to create a rim. I used epoxy to glue these layers to the inside deck. In the picture you see 3 mirrors which are placed on the bottom of the boat.

I plan to use rubber strips to keep water out of the compartments.

Putting my supports in the highest position I can stand up straight. This makes the work easier.

Placing the wooden bulkheads was easy.

Text was put under the epoxy again, printed on rice paper with my inkjet printer.

Next series Link back

	Using organic shaped paper patterns I cut holes in the deck. The cutouts will later be used as hatchcovers. This was careful handiwork.
	Three layers of very thin plywood were used to create a rim. I used epoxy to glue these layers to the inside deck. In the picture you see 3 mirrors which are placed on the bottom of the boat.
	I plan to use rubber strips to keep water out of the compartments.
	Putting my supports in the highest position I can stand up straight. This makes the work easier.
	Placing the wooden bulkheads was easy.
	Text was put under the epoxy again, printed on rice paper with my inkjet printer.